PDF1AQK Oasis Bottleless Water Coolers

PDF1AQK Cold and Room Temperature Bottleless Water Cooler with Filtration System
The PDF1AQK cold and room temperature bottleless water cooler uses Oasis Quick Change Filters. The cooler has one sediment filter, one carbon filter, and one lead and cyst filter. Color ....Almond.
PDF1AQK -- cold and room temperature....$630 plus $75 for shipping and handling

Spare filter kit (033988-001) - Includes: 1 Pre-Filter (033660-001), 1 Post Carbon (033663-001)
and 1 Lead Cyst (033665-001)....$90 with free shipping and handling

Specifications for PDF/PHF Series Water Coolers

Cabinet: Available with OASIS^® patented Quick Change Disposable Cartridge Filtration Systems or OASIS^® manifold with vessel and cartridge system (See NSF Performance Data Sheets for removal claims under Standards 42 and 53).
Drip Receptor: Large and easy to clean with molded splash ridges that hold cup in place while filling.
Water Storage Reservoir: Removable large capacity 4.5+ gallons, injection molded reservoir with air-tight snap-on lid assembly that allows easy access for cleaning and sanitation. Provides 1.7 gallons of chilled water storage. Probe and sleeve cooling technology makes removal easy by reducing the time it takes to drain the reservoir when removing.
Capacity: Provides up to 1.3 gallons per hour of 50°F water at 70°F ambient temperature environment.
Cold Water Thermostat: Temperature controlled by an adjustable thermostat located behind the front access panel.
Refrigeration Unit: Convection-cooled condenser. Hermetically sealed compressor with automatic overload protection. Environmentally friendly R-134a refrigerant controlled by accurately calibrated capillary tube.

Stainless Steel Hot Water Tank (hot water models only): The removable, stainless steel ht tank puts the heating element where it works best - inside the hot tank. The result is more efficient heating and a hot tank that's easier to service. The adjustable thermostat allows customized setting for individual customer needs. The 500-watt heating element can be replaced on site, reducing time and service costs.
Hot Water Capacity (hot water models only): 45 six-ounce cups of piping hot water per hour.
Electrical: 110 volts, 60 Hz. Compressor hp: 1/20. Full load amps: Hot, Cook 'N Cold™ Models, 5.5 amps; Cook 'N Cold™ Models, 1.8 amps.
Dimensions: 43-1/2" x 13-1/2" x 16"
Net Weight: Hot, Cook 'N Cold™ Models, 61 lbs; Cook 'N Cold™ Models, 56 lbs.
Filters: NSF certified under Standards 42 and 53. One-piece manifold reduces leaks. Service filters in minutes by replacing pressure vessels containing fresh cartridges or replace elements on site. Plastic pressure vessels reused and not discarded.
Float System: Dual mechanical float system with safety backup designed for use with OASIS^® filtration system.

Attention: Do not connect to source water that is microbiologically unsafe or is of unknown quality unless disinfected before it enters unit. Source water must be potable.

home | Warranty

Cabinet: Available with OASIS^® patented Quick Change Disposable Cartridge Filtration Systems or OASIS^® manifold with vessel and cartridge system (See NSF Performance Data Sheets for removal claims under Standards 42 and 53). Drip Receptor: Large and easy to clean with molded splash ridges that hold cup in place while filling. Water Storage Reservoir: Removable large capacity 4.5+ gallons, injection molded reservoir with air-tight snap-on lid assembly that allows easy access for cleaning and sanitation. Provides 1.7 gallons of chilled water storage. Probe and sleeve cooling technology makes removal easy by reducing the time it takes to drain the reservoir when removing. Capacity: Provides up to 1.3 gallons per hour of 50°F water at 70°F ambient temperature environment. Cold Water Thermostat: Temperature controlled by an adjustable thermostat located behind the front access panel. Refrigeration Unit: Convection-cooled condenser. Hermetically sealed compressor with automatic overload protection. Environmentally friendly R-134a refrigerant controlled by accurately calibrated capillary tube.	Stainless Steel Hot Water Tank (hot water models only): The removable, stainless steel ht tank puts the heating element where it works best - inside the hot tank. The result is more efficient heating and a hot tank that's easier to service. The adjustable thermostat allows customized setting for individual customer needs. The 500-watt heating element can be replaced on site, reducing time and service costs. Hot Water Capacity (hot water models only): 45 six-ounce cups of piping hot water per hour. Electrical: 110 volts, 60 Hz. Compressor hp: 1/20. Full load amps: Hot, Cook 'N Cold™ Models, 5.5 amps; Cook 'N Cold™ Models, 1.8 amps. Dimensions: 43-1/2" x 13-1/2" x 16" Net Weight: Hot, Cook 'N Cold™ Models, 61 lbs; Cook 'N Cold™ Models, 56 lbs. Filters: NSF certified under Standards 42 and 53. One-piece manifold reduces leaks. Service filters in minutes by replacing pressure vessels containing fresh cartridges or replace elements on site. Plastic pressure vessels reused and not discarded. Float System: Dual mechanical float system with safety backup designed for use with OASIS^® filtration system.
Attention: Do not connect to source water that is microbiologically unsafe or is of unknown quality unless disinfected before it enters unit. Source water must be potable.